Lexmark 3455 - Manual (Page 95)

95
7.6 Printing IPDS from PSF/400 with OS/400
V3R2
Install the latest cumulative PTF fix pack or tape for the system.
N
PTF 41993, which is available from IBM, provides a fix for out of paper
responses from the printer.
1. Set up and start the TCP/IP network:
N
Create a Token-Ring or an Ethernet line description for the printer
using
CRTLINTRN or CRTLINETH .
N
Add a TCP/IP interface using ADDTCPIFC .
N
Add a router definition, if required, using ADDTCPRTE .
N
Start TCP/IP using STRTCP .
2. Create a printer device description using CRTDEVPRT (see steps below and the
example on page 101).
Note: Only the required fields are listed below.
At the command line, type: CRTDEVPRT and press . Enter the following
information:
Device description OPTRA
(User defined name)
Device class *RMT
Device type *IPDS
Device model 0
Press