Lexmark 3455 - Manual (Page 124)

124
8.4 Changing the Coax Timeout Value (For
Reference Only)
If necessary you can change the Coax Timeout value by following these steps:
1. Press Menu> until NETWORK MENU displays. Press Select.
2. Press Menu> until NETWORK OPTION 1, NETWORK OPTION 2 or
NETWORK OPTION 3 displays. The number corresponds to the number
of the option connector the Adapter for SCS occupies. Press Select.
3. Press Menu> until you see SCS MENU 1, SCS MENU 2 or SCS MENU
3. Press Select.
4. Press Menu> until you see SCS OPTIONS. Press Select.
5. Press Menu> until you see MISC. SETTINGS. Press Select.
6. Press Menu> until you see Coax Timeout. Press Select. Enter a value from
0 to 255. Press Select. The default is 0 seconds (disabled). You can specify
how long the adapter will wait before closing the connection to the host.