Lexmark 3455 - Manual (Page 141)

141
8. Problem:
The message Two IPDS Sources Recycle Power displays and the printer stops.
Solution:
The SIMM for IPDS supports only LAN attached hosts or a coaxial/twinaxial
attached host. You must be trying to print from both:
N
a coaxial/twinaxial attachment using an Adapter for SCS and either
N
a LAN attachment using a MarkNet internal print server Token-Ring or
Ethernet adapter or
N
a parallel attachment using a MarkNet Pro or MarkNet XLe.
9. Problem:
I’m trying to set up a remote printer with a MarkNet internal print server,
MarkNet Pro external print server, or MarkNet XLe (named Optra) from my
AS/400. When I try to print to it, I get the message:
“All sessions ended for device Optra”
“Bind sense code ... received for mode QSPWTR device Optra”
“Writer...did not end normally”
Solution:
A remote output queue created using CRTOUTQ and a PSFCFG device created
using WRKAFP2 or CRTPSFCFG have the same user defined name. You must
use a unique name for the remote output queue for an ASCII device using TCP/IP
and the AS/400 Host Print Transform. This cannot be the same name used to
define the printer as an IPDS printer with WRKAFP2 or CRTPSFCFG.