Lanier 5415MFD - Manual (Page 28)

Initial User Data
1 - 18 About the Machine
Initial User Data
Before making the first communication after your machine has been installed, you must
make the following settings for communication setting and Initial User Data:
1
Line type setting:Tone/Pulse
2
Initial User Data:Date & Time, User Fax No., User Name
The data recorded through these operations is printed as the header in a document
transmitted and footer in a document received (Header Print and Footer Print functions).
The data is also used for timer communications, reports, and password communications.
Setting Line Type (TONE/PULSE)
1
Check that the initial screen is shown.
2
Press the "Program" key 6 times to enter the "COMM. SETTING".
3
Press "1" of the keypad it will show "1 TONE/PULSE" on the display briefly.
4
Using the "Arrow" keys, select either TONE or PULSE according to the telephone system
connection to your fax.
5
Check the settings you have made. If they are correct, press the "Yes" key to validate the
settings, and the display of "Comm. Setting" appears again.
If Pulse is selected:
•
Using the "Arrow" keys to select 10 pps or 20 pps.
•
If you don’t want to change this setting, press the "No/Clear" key.
•
Then press the "Yes" key to stop the setting, the message “COMMU. SETTING”
appears again.
6
Press the "No/Clear" key return to the initial screen.