Lanier 5415MFD - Manual (Page 169)

Printing a Report
Printing Reports 9 - 27
Printing a Report
A report can be automatically printed when t"AUTO" is the setting, or manually printed at any
time you need.
Automatic Printing the Report (Setting by Program key)
The following reports can be set to Auto printing or Manual printing by Program function. When
the Auto-Printing is set to ON, the report is printed automatically when printing conditions are
met; when the auto printing is set to OFF, you must use the Report utilities to print the desired
report.
Note: There is no need to set auto printing for following reports. They are
automatically printed when printing conditions are met.
Report Name Description
Activity Report Prints a list of results of the last 60 communications.
Reservation Report Prints a list of the contents of reservations of
Broadcast transmission and multi-polling reception.
TX Result Report Prints a list of the result of a transmission after it has
been completed.
RX Result Report Prints out a list of the results when receiving a
confidential or multi-polling document, or when
errors occur during reception.
Report Name Description
Relay Broadcast Report After relay broadcast, machine will make a
schedule to transmit the report.
Lost Report Prints a list of thedocuments whose data was lost
that was received in memory
Backup RAM Error
Report
Before turning OFF the power, prints out a list of
the SET utilities, etc., which were not stored in the
Backup RAM because of memory error.