Lexmark series x5100 - Manual (Page 61)

57
Note: When autocrop is on, the object (wherever it is placed
on the glass) will be printed in the upper left corner of the
page. This might make your copy look different from the
original.
The scanner unit will not close
To close the scanner unit after installing cartridges, unlocking the scanner
bed, or removing a paper jam, follow these steps:
1 Using both hands, lift the scanner unit.
2 Push and hold the scanner support back.
3 Carefully lower the scanner unit until it is completely closed.
Copied objects appear in a different location on the page
This will only happen if your All-In-One is attached to a computer. When
the default for auto crop (Color Photo) is on for copying, any object found
on the scanner glass will be positioned at the top left corner of the page.