Lexmark series x5100 - Manual (Page 27)

23
2 Open the top cover.
3 Place the item you want to scan face down on the scanner glass.
Make sure the upper left corner of the front of the item aligns with
the arrow at the bottom right of the scanner.
4 Close the top cover.
5 Press E-mail, File, Software.
The scan destination that you last selected (or the factory default,
e-mail) appears.
6 Press the right arrow to scroll through the list of scan destinations.
7 When your preferred scan destination appears, press Select.
8 Press Start Scan to begin a scan job using the current settings.