Lexmark series x5100 - Manual (Page 45)

41
8 Load paper into the paper support.
9 Questions appear on the display. Use the buttons on the operator
panel to answer the questions:
a If the color cartridge you installed is New (never been used),
press Select.
If it is old, press the right arrow button once, and then press
Select.
b If the part number that appears is the number of the cartridge
you are using, press Select.
If it is not the number of the cartridge you are using, press the
right arrow button until the correct part number appears, and
then press Select.
c If the black cartridge you installed is New, press Select.
If it is old, press the right arrow button once, and then press
Select.
The part number that appears should be the number of the
cartridge you are using.
d Press Select.
Continue with “Aligning the print cartridges” to ensure proper
installation.