Lexmark series x5100 - Manual (Page 30)

26
Printing
1 With your document open, click File Print.
2 To change the All-In-One settings, click Properties, Options,
Setup or Preferences (depending on the program or operating
system).
3 On the three tabs along the left side (Quality/Copies, Paper Setup,
and Print Layout) of the Print Properties screen, confirm the
selections and then click OK or Print (depending on the program or
operating system).
Sending a fax using the operator panel
To send a fax of a scanned document:
1 Make sure your All-In-One is attached to a computer with a modem.
2 Place the item you want to fax face down on the scanner glass.
Make sure the upper left corner of the front of the item aligns with
the arrow at the bottom right of the scanner.
3 Press Start Fax.
The Fax software appears on your computer screen.