Liebert STS2 - Manual (Page 104)

Touch Screen Display
96
13.0 T
OUCH
S
CREEN
D
ISPLAY
The STS2/PDU can be configured with a Color Graphical LCD touch screen display that allows you to
quickly check the status of the unit and identify problems.
A touch screen LCD is available through the front of the STS2/PDU. This screen provides a graphical
(Mimic) display of the switch’s operation, plus system information including system parameters,
alarms and faults.
The LCD provides a color, back-lit touch screen as a user interface. In addition to the Mimic and the
system parameters, the screen provides a series of menus to allow you to configure the STS2/PDU,
including the control of the preferred source, auto/manual retransfer selection, alarm notification and
other system setpoints. The touch screen also provides buttons to reset alarms and turn off audible
alarms, such as a horn.
13.1 Display Overview
The STS2/PDU Color Graphical Display provides three areas of information, plus buttons and a series
of menu choices.
The Color Graphical Display contains the following features:
• Mimic — a graphical diagram of the status of the unit.
• Event controls — allow you to reset alarms and turn off audible alarms.
• Event display — displays any active alarm or fault condition, in real-time.
• Menus — provide choices and configuration settings in dialog boxes or information in the display
panel.
• Display panel — provides additional information, depending on the menu choice that was last
selected. This information includes event help text and startup and bypass procedures.
Figure 62 STS2/PDU Touch Screen Display
Mimic
Event display
Event controls
Display panel
and
help screen
Menu options