Liebert Series 600T User Manual
Series 600t™ ups
Table of contents
Document Outline
- Overview of This Manual
- 1.0 Introduction
- 2.0 Theory of Operation
- 3.0 Operation
- 3.1 Display Screen and Operator Controls
- Features
- Figure 8 Operator Controls, 65 to 80 kVA (left) and 100 to 500 kVA (right)
- Figure 9 System Control Cabinet Operator Controls (SCCB Pictured)
- Figure 10 Series 600T UPS and SCC Operator Control Panels
- Figure 11 Switches Behind SCC Control Panel Door
- Figure 12 Menu Tree
- 3.1.1 Master Menu Screen
- 3.1.2 Monitor/Mimic Display Screen
- Figure 14 SCC Monitor/Mimic Display Screen
- Input Metering Displays
- Output Metering Displays
- Status/Alarm Message Areas
- Figure 15 Module Monitor/Mimic Display Screen
- Input Metering Displays
- Output Metering Displays
- Alarm Messages
- Figure 16 Monitor/Mimic Display Screen Examples: Normal Power Flow, SCC (above) and Module
- Figure 17 Monitor/Mimic Display Screen Examples: Utility Fail, SCC (above) and Module
- Figure 18 Monitor/Mimic Display Screen Examples: Load on Bypass, UPS Modules On and Charging Batt...
- Figure 19 Monitor/Mimic Display Screen Examples: Load on UPS, One UPS Module Off Line SCC (above)...
- Figure 20 Monitor/Mimic Display Screen Examples: Load on Bypass, All UPS Modules Off Line
- 3.1.3 Walk-In Display Screen
- 3.1.4 Status Reports Screens
- Figure 22 Status Reports Screen
- Present Status
- Figure 23 Present Status Report Screens, SCC (above) and Module
- Event History
- Figure 24 Event History Report Screen
- History Status
- Figure 25 History Status Report Screens
- System Status
- Figure 26 Battery Cycle Monitor Screen
- Figure 27 Battery Cycle Monitoring Summary Screen
- Figure 28 Typical Data on Discharge Cycles of 91 to 240 Seconds Duration During the Recording Period
- 3.1.5 System Configuration Screens
- 3.1.6 Alarm Limit Settings Screen
- 3.1.7 Load Transfer Procedures Screen
- 3.1.8 Start-Up Procedures Screen
- 3.1.9 Shutdown Procedures Screen
- 3.1.10 Battery Time Screen (Module Only)
- 3.1.11 Meter Calibration Screen
- 3.1.12 Battery Equalize Screen
- 3.1.13 Alarm and Status Messages
- 3.1.14 Communication Interfaces
- 3.2 Modes of Operation
- 3.3 Manual Procedures
- 3.4 Automatic Operations
- 3.1 Display Screen and Operator Controls
- 4.0 Maintenance
- 5.0 Specifications and Ratings