Lowrance electronic Lowrance GlobalMap 5200C - Manual (Page 52)

46
Navigate to a Waypoint
You can select any waypoint visible on the Map Page with the cursor,
then use the Navigate to Cursor command (we'll describe how later in
this section.) However, you can avoid scrolling the map to pick your
waypoint if you use the Find Waypoint commands.
1. Press
WPT
| → to
S
AVED
|
ENT
. To look up the nearest waypoint, press
↓ to
N
EAREST
|
ENT
; or, to look by name and scroll through the entire
waypoint list, press
ENT
. For this example, search by name.
2. If your waypoint list is a long one, you can spell out the waypoint
name in the
F
IND
B
Y
N
AME
box to search for it. Press ↑ or ↓ to change the
first character, then press → to move the cursor to the next character
and repeat until the name is correct, then press
ENT
to jump to the list
below.
3. If the list is short, you can jump directly to the
F
IND
I
N
L
IST
box by
pressing
ENT
. Use ↑ or ↓ to select the waypoint name, press
ENT
and
the waypoint information screen appears with the
G
O
T
O
command se-
lected.
4. To begin navigating to the waypoint, press
ENT
.
Navigation Page, navigating toward waypoint 004 and leaving a trail.
Set Man Overboard (MOB) Waypoint
One of boating's most terrifying events is having a friend or family
member fall overboard. This situation can be deadly on any body of
water — fresh or salt. It's particularly dangerous at night or if you're
out of sight of land. Of course, the first thing to do is remain calm and
then use all standard safety procedures to rescue the person. This unit
has a man overboard feature that shows navigation data to the location
where the feature was activated.
Waypoint
Destination
name
Trail line
(solid)
Course line
(dotted)
Off course
range, set at
0.20 mile