Lowrance electronic Lowrance GlobalMap 5200C User Manual

Page 33

Main Menu.

The Main Menu commands and their functions are:
Screen command: changes the contrast or brightness of the display

screen.
Sounds command: enables or disables the sounds for key strokes and

alarms and sets the alarm style.
Transparency command: adjust the level of transparency for menus.
Alarms command: turns GPS alarms on or off and changes alarm

thresholds.
Route Planning command: used to plan, view or navigate a route.
My Trails command: shows, hides, creates and deletes plot trails. Also

used to navigate or backtrack a trail.
Cancel Navigation command: turns off the various navigation com-

mands. Use this command to stop navigating after you have reached

your destination waypoint, Point of Interest or map cursor location; or

after you reach the end of a route or trail.
GPS Setup command: sets various GPS receiver options.
System Setup command: sets general configuration options.
NMEA 2000: provides access to all NMEA 2000 network setup options,

including the configuration of devices on the network. For more infor-

mation, see Section 10: NMEA 2000 Menu.
Sun/Moon Calculations command: finds the rising and setting time

of the sun and the moon.
Trip Calculator command: shows trip status and statistics.
Timers command: controls the up timer, down timer and alarm clock

settings.