Lanier LD075 - Manual (Page 95)

If You Cannot Make Copies As You Want
87
4
When Memory Is Full
Note
❒ If you set "Memory Full Auto Scan Restart" in User Tools (⇒ p.106) to "Yes",
the memory overflow message will not be displayed, but Connect Copy con-
tinues to scan originals automatically. Connect Copy continues scanning and
copying until the job is finished. Note that copy sets will be printed separately
at this time.
Message Cause Solution & Reference
Memory is full. ## originals
have been scanned.
Press [Print] to copy scanned
originals.
Do not remove remaining
originals.
Note
❒ Copying will stop and this
message will be displayed
when memory is full.
The scanned original exceeds
the number of pages that can
be stored in memory. Press the [Output] key to copy
scanned originals and clear
the scanning data. Press the
[Print Inquiry List]
key to clear
the scanning data and not
copy.
Press [Continue] to continue
printing.
[Stop] [Continue]
The machine checks if the re-
maining original should be
copied, after the scanned orig-
inal has been printed. To continue copying, remove
all copies then press the [Con-
tinue]
key. To stop copying,
press the [Stop] key.
MartiniC1_GBcopy4_FM.book Page 87 Tuesday, April 23, 2002 6:23 PM