Lanier LD075 - Manual (Page 78)

Copying
70
2
AAAA
Press the [Edit/Stamp] key.
BBBB
Press the [Stamp] key.
CCCC
Press the [Page Numbering] key.
DDDD
Select the format.
Note
❒ You can specify the stamp posi-
tion, pages to be stamped, and
numbering.
⇒ p.70 “Changing
the stamp position”
⇒ p.70
“Specify the first printing page
and start number”
EEEE
After you have made all desired
settings, press the [OK] key.
FFFF
Press the [OK] key.
GGGG
Set the originals, then press the
{{{{Start}}}} key.
Changing the stamp position
AAAA
Press the left bottom [Change] key.
BBBB
Select the desired position, and
then press the [OK] key.
Specify the first printing page and start
number
If you selected (P1,P2…, -1-,-2-…,
P.1, P.2…, 1, 2…, )
Note
❒ Below gives an example based on
when (P1, P2...) is selected. The
steps are the same for other cases.
AAAA
Press the right bottom [Change] key.
BBBB
Press the [First Printing Page] key,
and then use the number keys to
enter the original sheet number to
start numbering from.
Note
❒ To change the number entered,
press the [Print Inquiry List] or
{{{{Clear/Stop}}}} key, and then enter
a new number.
MartiniC1_GBcopy4_FM.book Page 70 Tuesday, April 23, 2002 6:23 PM