Lanier LD075 - Manual (Page 74)

Copying
66
2
To change the stamp position
AAAA
Press the [Change] key.
BBBB
Select the desired position, and
then press the [OK] key.
To program the user stamp
Note
❒ The range of stamp images for
readability is 10 – 297 mm high
(0.4" – 11.7") and 10 – 432 mm (0.4"
– 17") wide.
1. Placing the original on the expo-
sure glass
❒ Up to four messages that you use
frequently can be stored in memo-
ry.
AAAA
Make sure the machine is in Copy
mode.
BBBB
Press the
{{{{User Tools/Counter}}}} key.
CCCC
Press the [Copier/Document Server
Features]
key.
T h e m ai n m e n u o f t h e C o p i-
er/Document Server features ap-
pears.
DDDD
Press the [Stamp] key.
EEEE
Press the [User Stamp] key.
FFFF
Press the [Program/Delete Stamp]
key.
GGGG
Press the [Program] key and press
the stamp number (1–4) you want
to program.
Note
❒ Stamp numbers with m already
have settings in them.
❒ If the stamp number is already
being used, the machine will
ask you if you wish to overwrite
it — Press the [Yes] or [No] key.
HHHH
Enter the user stamp name with
the letter keys on the display pan-
el. You can register up to 10 char-
acters.
Reference
⇒“Entering Text Characters” in
the General Settings Guide
IIII
Enter the horizontal size of the
stamp with the number keys, and
then press the [#] key.
JJJJ
Press the [Vertical] key, and then
enter the vertical size in the same
way as step
IIII .
KKKK
Place the user stamp on the expo-
sure glass, and then press the
["Start Scanning"]
key.
The original will be scanned, and
the stamp will be registered.
ZGVX040E
1
ZGVS010E
MartiniC1_GBcopy4_FM.book Page 66 Tuesday, April 23, 2002 6:23 PM