Lanier LD075 - Manual (Page 68)

Copying
60
2
Inside Erase
AAAA
Decide where the machine starts
scanning (X1, Y1) and where it
stops scanning (X2, Y2).
Note
❒ You can input lengths of 0 – 432
mm, 0 – 17".
BBBB
Press the [Edit/Stamp] key.
CCCC
Press the [Erase] key.
DDDD
Press the [Erase Inside 1] or [Erase
Inside 2]
key.
EEEE
Enter the value of [X1] with the
number keys, and then press the
[#]
key.
FFFF
Enter the value of [Y1] with the
number keys, and then press the
[#]
key.
GGGG
Enter the value of [X2] with the
number keys, and then press the
[#]
key.
HHHH
Enter the value of [Y2] with the
number keys, and then press the
[#]
key.
IIII
Press the [2-sided Setting] key and
the [Back Side] key.
Note
❒ If you don't need to erase the
image on the back, go to step
K.
JJJJ
Enter the values of [X1], [Y1], [X2]
and [Y2] for the back.
Note
❒ Erasing the image on the back is
valid when you copy 2-sided
originals.
KKKK
Press the [OK] key.
LLLL
Press the [OK] key.
MMMM
Press the [OK] key.
NNNN
Place your originals, and then
press the
{{{{Start}}}} key.
Outside Erase
AAAA
Decide where the machine starts
scanning (X1, Y1) and where it
stops scanning (X2, Y2).
Note
❒ You can input lengths of 0 – 432
mm, 0 – 17".
BBBB
Press the [Edit/Stamp] key.
CCCC
Press the [Erase] key.
DDDD
Press the [Erase Outside] key.
MartiniC1_GBcopy4_FM.book Page 60 Tuesday, April 23, 2002 6:23 PM