Lanier LD075 - Manual (Page 80)

Copying
72
2
FFFF
Press the [Total Pages] key, and
then use the number keys to enter
the total number of original pag-
es, then press the
{{{{#}}}} key.
GGGG
Press the [OK] key.
Note
❒ To change settings after press-
ing the [OK] key, press the right
bottom [Change] key, and then
enter the numbers again.
If you selected (1–1, 1–2,…)
AAAA
Press the right bottom [Change]
key.
BBBB
Press the [First Printing Page] key,
and then use the number keys to
enter the original sheet number to
start numbering from.
Note
❒ To change the number entered,
press the [Print Inquiry List] or
{{{{Clear/Stop}}}} key, and then enter
a new number.
CCCC
Press the {{{{#}}}} key.
DDDD
Press the [First Chapter No.] key,
and then use the number keys to
enter the chapter number to start
numbering from, then press the
{{{{#}}}} key.
EEEE
Press the [Numbering from/to] key,
and then use the number keys to
enter the page number to start
numbering from, then press the
{{{{#}}}} key.
FFFF
Press the [OK] key.
GGGG
If page designation is complete,
press the [OK] key.
Covers
Using this function, you can add cov-
er sheets or designate certain pages to
be copied on slip sheets.
Preparation
Before selecting this function, set
the tray for the front cover paper.
⇒“Cover Sheet Tray” in the Gen-
eral Settings Guide
Note
❒ The cover sheet should be the same
size and direction as the copy pa-
per.
❒ You cannot set copy paper in the
bypass tray. Only set cover sheets
in the bypass tray.
❒ When selecting [Copy], select
whether the front and back covers
are copied 1-sided or 2-sided.
⇒“Cover Sheet Tray” in the Gen-
eral Settings Guide
Reference
To set paper when using the inter-
poser, see “Loading Paper in the
Interposer” in the General Settings
Guide.
❖ ❖ ❖ ❖ Front Cover
The first page of your originals is
copied on a special cover paper, or
a cover sheet is inserted before the
first copy.
MartiniC1_GBcopy4_FM.book Page 72 Tuesday, April 23, 2002 6:23 PM