Lanier LD075 - Manual (Page 38)

Copying
30
2
Preset Reduce/Enlarge
You can select a preset ratio for copy-
ing.
❖ ❖ ❖ ❖ Base Point
The base point of Enlarge/Reduce
differs depending on how the orig-
inal is scanned. When the original
is set on the exposure glass, the up-
per left corner will be the base
point. When it is set to the docu-
ment feeder, the bottom left corner
of the original will be the base
point.
1. Base point when setting on the ex-
posure glass.
2. Base point when setting on the
document feeder.
Reference
Related Initial Settings
⇒ p.99 “Copy Function Key: F1–
F5”
⇒ p.100 “R/E Priority”
AAAA
Press the [Reduce/Enlarge] key.
Note
❒ To select a preset ratio on the in-
itial display, press the shortcut
reduce/enlarge key and go to
step
D .
BBBB
Press the [Enlarge] or [Reduce] key.
CCCC
Select a ratio, and then press the
[OK]
key.
DDDD
Place your originals, and then
press the
{{{{Start}}}} key.
MartiniC1_GBcopy4_FM.book Page 30 Tuesday, April 23, 2002 6:23 PM