Lantronix UDS2100 - Manual (Page 33)

4: Configuration Using Web Manager
UDS2100 User Guide 33
3. When you are finished, click the OK button.
4. On the main menu, click Apply Settings.
Connection Settings - UDP
To configure a channel’s UDP settings:
1. On the main menu, click Connection. The Connection Settings window for the
selected channel displays.
2. In the available fields, enter or modify the following information:
Figure 4-7. UDP Connection Settings
Connect Protocol
Protocol Select UDP from the drop-down menu.
Datagram Mode
Datagram Type Configures the remote IP or network broadcast address
and the remote port. Enter 01 for directed or broadcast
UDP. The default setting is 00.