Kodak 800 SERIES - Manual (Page 221)

NovaJet 800 Series Service Manual
Assembly\Disassembly 5-17
Figure 5-9. Cooling Fan/AC Entry Module Removal.
Install the Power Supply, Cooling Fan, and AC Entry Module
To install the Cooling Fan and AC Entry Module:
1. Insert the AC Entry Module into the AC Entry Module hole on the Right
Baseplate. Press in until it snaps securely into place.
2. Attach the AC Entry Module ground connection to the grounding stud
on the Right Baseplate.
3. Hold the Cooling Fan into place while inserting the four bolts into the
assembly. Attach the four 1/4” nuts to the bolts to secure Fan
assembly. Torque to 4 in-lbs.
4. Reinstall the Power Supply Bracket using four screws.