Kenwood TK-5910 - Manual (Page 39)

33
to weak signals on the channel. While squelch is off, the (KCH-4) or MON
(KCH-5) icon appears on the display. Press the Monitor key again to turn the
transceiver squelch back on.
• None
No function has been programmed on the key.
• Operator Selectable Tone
Refer to “Q
Uiet
t
alk
(Qt)/ D
igital
Q
Uiet
t
alk
(DQt)” on page 8 for details.
• OST Down
Press this key to decrease the Operator Selectable Tone number of your selected
channel.
• OST Up
Press this key to increase the Operator Selectable Tone number of your selected
channel.
• Playback
Refer to “vgS-1 OPtiOnal vOice gUiDe & StORage Unit” on page 37.
• Public Address
Press this key to toggle the Public Address function ON and OFF. “PUBLIC
ADRS” appears on the display when Public Address is activated. To use the
Public Address system, your dealer must first install an external speaker. This
function causes all audio input via the microphone to be amplified and output from
the external speaker.
• Regroup Request
Press this key to send a request to the dispatcher to join the talkgroup set up by
the dispatcher. While using the dynamic group, “Dyn. Regroup” appears on the
display.
• Rekey Request
Press this key to send a Hello Command (Rekey Request).
• Scan
Refer to “SCAN” on page 5.
• Scan Delete
Refer to “t
eMPORaRy
c
hannel
l
OckOUt
” on page 5.
• Scan Program
Refer to “S
can
P
ROgRaMMing
” on page 7.
• Scrambler/ Encryption
Refer to “SCRAMBLER (FM) /
ENCRYPTION (P5)” on page 6.
• Scrambler/ Encryption Code
Refer to “SCRAMBLER (FM) /
ENCRYPTION (P5)” on page 6.
• Selcall
Refer to “FleetSync: ALPHANUMERIC -WAY PAGING FUNCTION” on
page 9.
• Selcall + Status
Refer to “FleetSync: ALPHANUMERIC -WAY PAGING FUNCTION” on
page 9.