Kenwood TK-5910 - Manual (Page 16)

0
Programmable Function Con FM Con P25 Trunk P25
None ✓ ✓ ✓
Operator Selectable Tone ✓ Mix N/A
OST Down ✓ Mix N/A
OST Up ✓ Mix N/A
Playback ✓ ✓ ✓
Public Address ✓ ✓ ✓
Regroup Request N/A N/A ✓
Rekey Request 5 Mix ✓ N/A
Scan ✓ ✓ ✓
Scan Delete ✓ ✓ ✓
Scan Program ✓ ✓ ✓
Scrambler/ Encryption ✓ ✓ ✓
Scrambler/ Encryption Code ✓ ✓ ✓
Selcall ,6 ✓ Mix N/A
Selcall + Status ,6 ✓ Mix N/A
Send the GPS Data ,6 ✓ Mix N/A
Site Lock N/A N/A ✓
Speaker ~ Mute ✓ ✓ ✓
Squelch Level ✓ Mix N/A
Status ,6 ✓ Mix ✓
System Search N/A N/A ✓
Tactical Group ✓ ✓ N/A
Talk Around ✓ ✓ ✓
Talkgroup Mix ✓ N/A
Tone ✓ ✓ ✓
Zeroize ✓ ✓ ✓
Zone Down ✓ ✓ ✓
Zone Select 3 ✓ ✓ ✓
Zone Up ✓ ✓ ✓
-tone, Scan Program, Selcall, Selcall Status, Status, Send the GPS Data, and Tactical Group are
available only on the TK-570/ TK-570H/ TK-580/ TK-580H.
Auto Reply Message and Playback are available only if the VGS- optional board has been installed.
3 Channel Select and Zone Select can be programmed only on the CH control.
4 Emergency can be programmed only on the PF 5 key.
5 Keyset and Rekey Request can be used when set as P5 OTAR.
6 Selcall, Selcall + Status, Send the GPS data, and Status cannot be used when the transmit mode is
set as Conventional P5.