Kodak ESP 5200 Series - Manual (Page 48)

Troubleshooting
43 www.kodak.com/go/aiosupport
Status lights
The status lights indicate the condition of the printer. There are two status lights on
the printer, one that indicates power, the other indicates Wi-Fi status.
Power status light
Wi-Fi status light
Power light What it means
Off • The printer is turned off.
– Press the on/off button to turn on power.
• The printer does not have power.
– Make sure that the power cord is plugged into the back of the printer and
into an electrical outlet, and that the electrical outlet has power.
Blinking • The printer is busy.
– Wait for the printer to finish the task.
On • The printer is ready
Power light What it means
Off The Wi-Fi radio is either turned off, or is turned on but not connected to a
wireless network.
Blinks continuously The Wi-Fi radio is turned on and the printer is searching for available wireless
networks within range.
Blinks intermittently The Wi-Fi radio is turned on and the printer cannot find any available wireless
networks within range, or the Wi-Fi radio connection has been interrupted, or
is too weak to send signals to and from the printer
To find and connect to an available wireless network within range, press OK,
turn the Wi-Fi radio off, and run the WiFi Setup Wizard (see Configuring a
wireless network connection, page 5 ).
On The Wi-Fi radio is turned on and there is a working connection between the
printer and a wireless network.