Kodak ESP 5200 Series - Manual (Page 34)

29 www.kodak.com/go/aiosupport
7
Maintaining Your Printer
Your printer requires little maintenance. However, Kodak recommends cleaning the
scanner glass and lid regularly to remove dust and fingerprints, which affect the
quality and accuracy of scanning.
Except for cleaning the printer, keep the printer plugged in with AC power turned on.
If you use a power strip, don't turn off the power strip.
Keep the printhead and ink cartridges in the printer at all times. This helps prevent
damage to the printhead.
Service agreements are available in some countries. Contact dealers of KODAK
Products for more information.
For recycling and/or disposal information, contact your local authorities. In the US,
go to the Electronics Industry Alliance at
www.eia.org or go to
www.kodak.com/go/recycle .
General care and cleaning
CAUTION:
Always disconnect the power to the printer before cleaning it. Do not use
harsh or abrasive cleaners or organic solvents on the printer or any of its
parts.
• To clean the printer, wipe the outside with a clean, dry cloth.
• Keep the surrounding area vacuumed and litter-free.
• Protect the printer from tobacco smoke, dust, sand, other small particles (such
as crumbs), and liquid spills.
• Do not place objects on the printer.
• Keep the printer supplies away from direct sunlight and out of high-temperature
environments.
• Do not allow chemicals, such as suntan lotion, to come into contact with the
painted surface of the printer.
• If the printer has been exposed to bad weather or has water inside it, turn it off
and let it dry completely. If this does not solve the problem, contact Kodak
Service & Support.