Kyocera FS-6700 - Manual (Page 79)

2-10
Switching Power On
Check that the power cord is securely plugged in at both ends. Check that the printer is connected
to the computer (See page 1-24).
1. Push the power switch to the ON ( | ) position.
2. Wait for the printer to warm up. During warm-up the message display will first indicate Self
test followed by Please wait .
3. At the end of the warm-up period, the ON LINE indicator lights, and the message display
indicates Ready .
The printer is now ready to print.
Note
If an error is detected while the printer is warming up, the ATTENTION indicator will light. A
message concerning the error will be displayed in the message display. (See Chapter 5.)
Power Switch
2.2. Operating Procedures