Kyocera FS-6700 - Manual (Page 152)

5-7
Chapter 5 Troubleshooting
The image is smeared
Clean the charger wire
Open the printer’s side cover. Pull the green main charger wire cleaning knob slowly in and out a
few times. See Section 4.2.
Faint or blurred printing
Check the control panel.
If the Toner low TK-20 Clean printer message is displayed and the indicator is flashing,
install a new toner kit. See Section 4.2.
Set the print density from the control panel to a higher level than the current setting. See Section
2.12.
Try changing the paper thickness setting on the Mode Select Menu. See Section 2.3.
Check the Ecoprint setting.
See Section 2.10.