Kyocera FS-6700 - Manual (Page 137)

4-7
Chapter 4 Maintenance
7. When the toner container is installed correctly on the developer, push the top of the toner
container unit (“PUSH HERE”) until it locks in.
Note
Make sure that the toner container is properly locked in the printer.
8. Close the top cover as shown below.
Note
It is necessary to clean the inside of the printer after replacing the toner container. If the toner
container is replaced when the message
Replace Toner Clean printer is displayed, the
message Clean printer Press CONTINUE will be displayed after replacement. After cleaning
the inside of the printer (See Section 4.2. Cleaning), the message will disappear when the
CONTINUE key is pressed, and the printer will be ready for printing.