Power problems, Power problems - 3, See section 5.2 – Kyocera FS-6700 User Manual

Page 148

Text mode
Original mode

5-3

Chapter 5 Troubleshooting

5.2. Power Problems

Note

The printer power rating must be within the voltage range in your country. If in doubt, consult your
dealer.

If nothing happens when you switch the printer’s power on, you have a power problem. The
symptoms are a dark control panel, no printing, and no fan sound. Proceed as follows.

Check the power switch.

The on position is marked “|”.

The off position is marked “O”.

Check the power cord.

If the cord is loose at either end, switch power off, plug the power cord in securely, then switch
power on again.

Call for the assistance of a service person.

If the above checks do not solve the problem, call for the assistance of a service person.