beautypg.com

Selecting resource protection mode – Kyocera FS-6700 User Manual

Page 105

background image

2-36

Selecting Resource Protection Mode

1. Pressing the MODE key will put the printer in Mode Select mode.

2. Press + or – to select

Others >

.

3. Press the

key.

4. Press the + or – key to display

>Resource prot.

and then press the ENTER key. A

?

will

flash and the current setting can be changed.

5. Press the + or – key and select the desired setting.

6. Press the ENTER key.

If you want to change the setting, press the CANCEL key before pressing the ENTER key.

7. Press the EXIT key. The Resource Protection mode setting is now changed.

2.11. Resource Protection

See also other documents in the category Kyocera Printers: