Kyocera FS-6700 - Manual (Page 142)

4-12
2. Pull the cleaning knob (Green) slowly in and out a few times. This pulls a cleaning pad inside
the drum unit along the wire.
Cleaning the Grid
Clean the grid at the time of toner kit replacement.
1. Take the grid cleaner from protective bag in the new toner kit, and remove the cap.
Note
The grid cleaner pad is impregnated with water. Perform the following cleaning procedure before
the pad dries.
4.2. Cleaning
Cleaning Knob
(Green)
Protective Bag
Cap
Grid Cleaner
Pad