Kyocera FS-6700 - Manual (Page 117)

2-48
Deleting Data from a Memory Card
It is possible to delete data names on a memory card one at a time. Check that the memory card
can be written (that write-protection is released).
1. Bring up the menu >Delete data on the message display. This display only appears if the
memory card contains data.
2. Press the ENTER key. ? will flash and a data name will appear after it.
The ? will flash, and a data name will appear.
>Delete data
? (data name)
3. You can scroll through data names on the memory card one by one by pressing the + key.
Press the CANCEL key to cancel this operation.
4. Press ENTER key while the data name you wish to delete is shown. The message display will
change to Processing .
The message display will return to Ready .
Formatting Memory Cards
It is necessary to first format a new memory card before it can be used by the printer. Formatted
memory cards can then be written with data.
Notes
● Note that if you format a memory card which already has data written on it, that data will be lost
entirely.
● Check that the memory card can be written (that write-protection is released).
2.14. Memory Cards