Kyocera FS-6700 - Manual (Page 119)

2-50
Printing a List of Data Names (Partitions)
This operation prints the contents (data names, data size, etc.) of the memory card inserted in the
memory card slot.
1. Bring up the menu >List of Partitions on the message display.
2. Press the ENTER key. ? will appear.
Press the CANCEL key to cancel printing.
3. Pressing the ENTER key again will cause printing to start.
After this information is printed, the message display will return to Ready .
Note
“Remaining Size” in the partition list indicates the amount of remaining memory on the memory
card. Since the system uses about 70 bytes to write a piece of data on the memory card, the
actual available memory on the card is a little less than that displayed.
2.14. Memory Cards