Kyocera FS-6700 - Manual (Page 145)

4-15
Chapter 4 Maintenance
2. Use the supplied cleaning brush to clean the entire length of the saw-toothed separator located
behind the transfer roller two or three times. Store the cleaning brush somewhere safe as it will
be required again in the future.
3. Wipe the paper dust on the registration roller and the paper ramp using the wiper cloth included
in the toner kit.
Note
Do not touch the transfer roller (the black roller) when wiping the paper ramp.
4. After cleaning, securely close the paper feed unit.
Separator
(saw-toothed)
Cleaning Brush
Transfer Roller
Paper Feed Unit
Paper Ramp
Transfer Roller [Black]
See Note below
Registration Roller
[Metal]
Paper Feed Unit
Wiper Cloth