Kyocera DuraMax - Manual (Page 54)

Sprint Direct Connect 45
calls are not going through, please check to see whether your contact is using a Sprint
phone.
Make a Group Connect Call From History
1. Press > History.
2. Highlight a group entry and press the DC button.
3. Continue the Group Connect call as described previously.
Make a Group Connect Call Without Saving
1. In standby mode, press > Contacts > Add New > New Group.
2. Press START (left softkey) to add Contacts entries with Direct Connect –capable
numbers to the group.
 When adding a contact for the Group Connect call, make sure you highlight the
entry ‘s Direct Connect–capable number (DC Only or Mobile+DC).
3. When you have finished selecting entries, press the DC button.
4. Continue the Group Connect call as described previously.
Join or Rejoin a Group Connect Call
If you are not available at the beginning of a Group Connect call, or if you drop off the call
temporarily, you can rejoin an in-progress Group Connect call.
1. Press > History.
2. Highlight the call and press the DC button.
3. Continue the Group Connect call as described previously.
Tip: You can also join or rejoin a Group Connect call from your Contacts list if you have
stored the group. See Create a Group Entry . Select the group entry and press the DC
button.
Note: If the Group Connect call has already ended, pressing the DC button initiates a new
Group Connect call.
Note: If you do not want to participate in a Group Connect call, press or IGNORE (right
softkey).
Set Group Termination Options
1. Press > Settings > DC Settings > Group Call Options.
2. Highlight an option and press .