Realignment – Kenwood TK-270G User Manual
Page 15
TK-260G/270G
15
No. Function
Choices
Display
Remarks
34 D Key
D Code
DKA_D_CD
Default
Assignment 1-16/1s
DKA_16__
35 DTMF
Code SQ
DTMF_OFF
Default
Signaling
SEL CALL
DTMF_SEL
36 Inter Mediaate 0-9,A-D,*,# IMC__#_
Default: # (Can be set only when
Code
DTMF signaling = SEL CALL.)
37 Group Code 0-9,A-D,*,# GPCD_FF_ Default;OFF
38 Auto Rest OFF
ART_OFF_
Time
1-15/1s
ART__10
Default;10s
39 Call Alert/
OFF
CA/T_OFF
Default
Transpond Call Alert
CA/T_C/A
Transpond CA/T_T/A
(Call Alert)
Transpond CA/T_T/I
(ID Code)
Transpond CA/T_T/T
(tanspond Code)
Others
40 Panel Test/panel Enable
PTM_ENA
Default (Not used for TK-260G)
Tuning MODE
Disable
PTM_DIS
8-4. Memory Reset Mode
This mode is used to clear data for functions that can be set
in Self Programming Mode or to return to reset values (default).
Pressing [
°
] when "SELF" is shown, sets the display to
"CANCEL".
Turning the encoder alternately switches the display
between "CANCEL" "READY".
Pressing [
°
] when "READY" is shown, clears the data and
sets the display to "CLEAR".
Pressing [
°
] again, returns the display to "SELF".
Pressing [
°
] when "CANCEL" is shown, returns the display
to "SELF" without resetting the data.
When the [
°
] switch is pressed while "SELF" is displayed,
the memory is reset.
When the memory is reset, mode data and model data are
not reset.
The TK-260G cannot reset the memory.
●
Flow Chart
Self programming mode
Function Setting Mode
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
Function set mode
[LAMP]
[LAMP] key function
[MON] key function
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]/[3]
[
2]
key function
[
3]
key function
[CH]
key function
Time Out Timer
T.O.T. Pre-alert time
T.O.T. Rekey time
T.O.T. Reset time
Power on tone yes/no
Contorol tone yes/no
WArning tone yes/no
Battery Save on/off
Clear to Transpond
Signaling
Priority
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
[LAMP]
Look back time A
Look back time B
Revert channel
Dropout delay time
Dwell time
Digit time
First digit time
Inter digit time
First digit delay
Rise time with QT
Dial ID
DTMF hold time
No. of DTMF key
D key assignment
DTMF signaling
Inter mediate code
Group code
Auto reset time
Call alert/Transpond
[LAMP]
[LAMP]
[LAMP]
[LAMP]
Store & Send
Squelch level
Panel test/Panel tuning
mode
[ ] key function
[ ] key function
REALIGNMENT