Kenwood TK-270G - Manual (Page 14)

TK-260G/270G
14
No. Function Choices Display Remarks No. Function Choices Display Remarks
4 [
•
]TK-270G Group Up KEY2_25
only Scrambler KEY2_26 Only when scrambler is set
5 [ 2 ]TK-270G No Function KEY3_OFF
only Talk Around KEY3_3 Default
Display Character KEY3_5
Home Channel KEY3_7
Channel Down KEY3_8
Channel Up KEY3_9
Keylock KEY3_10
Lamp KEY3_11
Selectable QT KEY3_15 M destination only
Monitor A KEY3_17
Monitor B KEY3_18
Monitor C KEY3_19
Monitor D KEY3_20
RF Power Low KEY3_21 Default
Scan KEY3_22
Scan DEL/ADD KEY3_23
Group Down KEY3_24
Group Up KEY3_25
Scrambler KEY3_26 Only when scrambler is set
6 [ 3 ]TK-270G No Function KEY4_OFF
only Talk Around KEY4_3
Display Character KEY4_5
Home Channel KEY4_7
Channel Down KEY4_8
Channel Up KEY4_9
Keylock KEY4_10
Lamp KEY4_11
Selectable QT KEY4_15 M destination only
Monitor A KEY4_17
Monitor B KEY4_18
Monitor C KEY4_19
Monitor D KEY4_20
RF Power Low KEY4_21 Default
Scan KEY4_22
Scan DEL/ADD KEY4_23
Group Down KEY4_24
Group Up KEY4_25
Scrambler KEY4_26 Only when scrambler is set
7 [CH] Channel Up/Down CH_UP/DN Default
Group Up/Down GR_UP/DN
No Function KNOB_OFF
Optional Feature
8 Power On Tone YES/NO PONT_YES Default:YES
9 Control Tone YES/NO CNTT_YES Default:YES
10 Warning Tone YES/NO WART_YES Default:YES
11 Time Out Timer OFF,15-300/15s Step TOT_60 Default:60s
12 TOT OFF,1-10/ TOTP_PFF Cannot be set when TOT is OFF.
Pre-Alert Time 1s Step Default:OFF
13 TOT OFF1-60/ TOTK_OFF Cannot be set when TOT is OFF.
Rekey Time 1s Step Default:OFF
14 TOT OFF1-15/ TOTS_OFF Cannot be set when TOT is OFF.
Reset Time 1s Step Default:OFF
15 Clear to Transpond YES CTT_YES
(BCL for Transpond) NO CTT_NO Default
16 Battery Save ON BATT_ON Default
OFF BATT_OFF
17 Signaling OR SIG__OR Default
AND SIG_AND
18 Squelch Level 0-9/1 Step SQL__5 Default;5
19 Priority None PRI_NONE Default
Fixed PRI_FIX_
Selected PRI_SEL_
20 Lock Back 0.5-5.0/0.05 LBA_500 Default:500ms Cannot be
Time A set when Priority = none.
21 Lock Back 0.5-5.0/0.05 LBB_2000 Default:2000ms Cannot
Time B be set when Priority = none.
22 Revert Selected REV_SEL
Channel Last Called REV_L/C_ Default
Last Used REV_L/U_
Selected + Talk Back REV_S/T_
Priority REV_PRI_
Priority + Talk Back REV_P/T_
23 Dropout 0-300/1s DODT___3 Default;3s
Delay Time
24 Dwell Time 0-300/1s DWL___3 Default;3s
DTMF
25 Digit Time 50-200/10ms DIGT__50 Default;50ms
26 Inter Digit Time 50-1000/50ms IDT___50 Default;50ms
27 First Digit Time 50-200/10ms FDT___50 Default;50ms
28 First Digit Delay 50-1000/50ms RIST_100 Default;100ms
29 Rise Time with QT 50-1000/50ms RTWQ_100 Default;100ms
30 DIAL ID Enable DID_ENA
Diable DID_DIS Default
31 No.of 12Key NODK_12 Default
DTMF Key 16Key NODK_16
32 DTMF Hold Time ON DHT__ON Default
OFF DHT__OFF
33 Store and Send ON SAS__ENA
OFF SAS__CSQ Default
REALIGNMENT