Satellite radio tuner (optional accessory) control – Kenwood KOS-A300 User Manual
Page 28
28
|
KOS-A300
Satellite Radio tuner (Optional Accessory) control
Basic Operation
Selecting Satellite Radio source
Press the [SRC] button.
Select the “SIRIUS”/ “XM” display.
⁄
• You need to register to the service provider to receive
the service by Satellite Radio. Consult the service
provider if “CALL … TO SUBSCRIBE” appears.
• The radio may take a little time to start receiving after
you select the Satellite Radio source.
• If the signal reception fails, “Acquiring Aignal”/ “No Signal”
appears.
Switching Seek Mode
Select “MENU”
>
“Seek Mode”.
For how to select Function Control item, refer to
Display
Operation
“CH”
Normal manual seeking control.
“PRESET”
Search in order of the channels in the Preset memory.
Select the channel
Push the Control knob towards right or left.
Selecting the Preset Band
Push the Control knob toward up.
Each time you push the knob, the preset band
alternates between the SR1, SR2, SR3 and SR4.
Category and Channel Search
Selecting the channel and category you want to
receive.
1
Enter Search mode
Turn the Control knob.
2
Enter Category and Channel Search mode
Turn the Control knob to select “CH Search”, and
then press the Control knob.
3
Select the Category
Turn the Control knob to select Category, and
then press the Control knob.
4
Select the Channel
Turn the Control knob to select Channel, and
then press the Control knob.
Cancelling Category and Channel Search mode
Press the [FNC] button.
Preset Memory
Putting the channel in the memory.
1
Select the channel to put in the memory
Push the Control knob towards right or left.
2
Enter Search mode
Turn the Control knob.
3
Select the number to put in the memory
Turn the Control knob.
4
Register channel to preset number
Press the Control knob for at least 1 second.
Cancelling the Preset Memory mode
Press the [FNC] button.
⁄
• Only the channel number is stored. Category information
is not stored.
Preset Tuning
Recalling the channels in the memory.
1
Enter Search mode
Turn the Control knob.
2
Select a desired station in the memory
Turn the Control knob.
3
Recall the station
Push the Control knob.
Cancelling Preset Tuning
Press the [FNC] button.
Channel Scan
Every receivable Channel is checked for 10 seconds.
1
Start Channel Scan
Select “Channel Scan”.
For how to select Function Control items, refer to
2
Release it when the channel you want to listen
to is received
Press the Control knob.
⁄
• You cannot Channel search until the category
information is acquired.