Kenwood KOS-A300 User Manual
Page 25
English
|
25
Deleting a Registered Bluetooth
device
You can delete a registered Bluetooth device.
1
Select Bluetooth device deletion mode
Select “MENU”
>
“Device Delete”.
For how to select Function Control item, refer to
2
Enter Bluetooth device deletion mode
Press the Control knob for at least 1 second.
“(name)” is displayed.
3
Select the Bluetooth device
Turn the Control knob.
4
Delete the selected Bluetooth device
Press the Control knob.
“Delete?” is displayed.
5
Turn the Control knob to select “YES”, and then
press the Control knob.
“Delete” is displayed.
6
Exit Bluetooth device deletion mode
Press the [FNC] button.
⁄
• When a registered cell-phone is deleted, its Phone Book,
log, SMS, and voice tag are also deleted.
Displaying the Firmware Version
Display the version of the firmware of this unit.
1
Enter Bluetooth Firmware update mode
Select “MENU”
>
“BT F/W Update”.
For how to select Function Control item, refer to
2
Enter Bluetooth Firmware update mode
Press the Control knob for at least 1 second.
The firmware version appears.
3
Exit Bluetooth Firmware update mode
Press the [FNC] button.
⁄
• For how to update the firmware, access our web site.
http://www.kenwood.com/bt/information/
Selecting the Bluetooth device You
Wish to Connect
When two or more Bluetooth devices have already
been registered, you need to select the Bluetooth
device you wish to use.
1
Select Bluetooth device selection mode
Cell-phone
Select “MENU”
>
“Phone Selection”.
Audio player
Select “MENU”
>
“Audio Selection”.
For how to select Function Control item, refer to
2
Enter Bluetooth device selection mode
Press the Control knob for at least 1 second.
“(name)” is displayed.
3
Select the Bluetooth device
Turn the Control knob.
4
Set up the Bluetooth device
Push the Control knob towards right or left.
“
✱(name)” or “-(name)” is displayed.
“
✱”: The selected Bluetooth device is busy.
“-”: The selected Bluetooth device is on standby.
“ “ (blank): The Bluetooth device is deselected.
5
Exit Bluetooth device selection mode
Press the [FNC] button.
⁄
• If a cell-phone is already selected, deselect it, and then
select a different one.
• If you cannot select a device using the audio player,
connect the device with the audio player.