Krell Industries MASTER REFERENCE SUBWOOFER - Manual (Page 54)

(SECTION SEVEN: Optional Configurations continued)
48
Mute Menu
This option allows you to customize the mute key to mute all subwoofer outputs or
only selected outputs. Also see Step IV. Match the High-pass and Low-pass
Filter Levels, on page 38, for more information on mute key configuration.
1. Press the menu key (37).
2. Use the adjust keys (43) to select the mute menu. The front panel display (4)
shows MUTE .
3. Press the enter key (38). The front panel display shows LPF ONLY .
4. Use the adjust keys to select the preferred muting configuration for high-pass
filter (hpf), low-pass filter (lpf), or by-pass filter (byp). Muting options are: LPF ONLY ,
HPF ONLY , BYP ONLY , LPF + HPF , LPF + BYP , HPF + BYP , and ALL .
5. Press the enter key to set the selection and return to the main menu.
6. Press the menu key to exit the menu mode and return to normal operation.
Unit ID Menu
The Unit ID menu allows you to set a unit ID for each subwoofer, when you use
multiple subwoofers in your system. Different unit IDs let you control each subwoofer
separately by pressing one of the unit keys (32) (1, 2, 3, 4) on the remote control.
You can also control all subwoofers at once by pressing the all key (33) on the
remote control.
Note
Once you assign an ID to a subwoofer, you must use one of the unit keys on the remote
control to control the subwoofer.
1. Press the menu key (37).
2. Use the adjust keys (43) to select the Unit ID menu. The front panel display (4)
shows UNIT ID .
3. Press the enter key (38). The front panel display shows UNIT 0.
4. Use the adjust keys to scroll through available options ( UNIT 0 through UNIT 4 ).
5. Press the enter key to set the preferred selection and return to the main menu.
6. Press the menu key to exit the menu mode and return to normal operation.