Krell Industries MASTER REFERENCE SUBWOOFER - Manual (Page 46)

(SECTION FOUR: Connections and Configurations continued)
40
C. To End Noise Generation
1. Press the menu key (37) to select the main menu.
2. Press the up adjust key (43) to select NOISEGEN .
3. Press the enter key (38), then press the up adjust key to select NOISE OFF .
4. Press the enter key to end noise generation and return to the main menu.
5. Press the menu key to exit the menu mode.
Step V. Select the Phase
This section explains how to select normal or inverted phase, to complete the
configuration and ensure optimum music quality.
1. With the subwoofer in the stand-by mode, press the power button (1) or power
key (26).
2. Begin playing a music or video selection.
3. Press the phase key (28) to switch between normal and inverted phases.
4. Listen for when the sound is clearer. You do not have to press the enter key to
set the phase.
Your subwoofer is ready to play music.
Step VI. Saving Your Settings to Presets
You can save the settings selected in Steps I – V in the subwoofer memory, using
one of the five presets (29, 30) on the Master Reference Subwoofer Remote Control.
Notes
Krell recommends using preset Thtr (30), the theater key, to save your stereo/LFE configuration
settings. Use presets 1 through 4 to save other desired settings.
Settings stored in preset 1 become the default when the subwoofer is turned off and
returned to the operational mode.