Kenwood HM-333 - Manual (Page 11)

System connection
11
Preparation section
Turning the knob switches the display contents.
"T A P E R V S . ? " ¡
"REC OPTIONS"
"AUTO PRESET" or "AUTO MEMORY" £
(Only when the TUNER input is selected)
"A U X I N P U T ? " °
(Only when the AUX input is selected)
"T I M E R S E T ? " wr
"A . P . S . S E T ? " 9
After pressing the menu key to select the menu se-
lect mode, turn the volume/multi control knob to
select the desired menu item.
To set or enter the setting of the menu item, press
the set/demo key.
* About the volume/multi control knob
7
Cassette holder )
To load or eject a cassette tape, press the area marked
0 push open on the cassette holder to open it.
8
menu key !‚
Press to switch the function of the volume/multi
control knob to the menu select mode.
This key is also used when setting the time of the day.
9
TAPE EQ. key ¡
Press to turn the tape equalizer on.
0
CD tray ^
Press the
0 CD key to open or close CD tray.
!
Basic operation keys
TUNER FM/AM key
™
Press to select the TUNER input.
This key is also used to select the received broadcast
band.
CD
6 key ^
Press to select the CD input and start playback. Press-
ing this key during CD playback initiates pause.
TAPE
2 3 keys )
Press to select the TAPE (cassette deck) input and
start playback of a tape. Pressing this key during tape
playback switches the tape transport direction.
AUX key °
Press to reproduce the external source component
connected to the AUX (analog auxiliary input) jacks.
Pressing this key while the unit is off turns it on at the
same time as selecting the AUX input.
@
standby/timer indicator
Lights up when the unit is set to the Standby mode of
power.
Red : Ordinary standby.
Green : Timer standby.
Off : The unit is On.
#
Power key (For U.S.A. and Canada) $
key (For Other Countries ) $
Press to set the unit to On or Standby.
$
sound key %
Press to switch the sound effect to EX.BASS or
LOUD.
%
repeat key ‹
Press for setting repeated playback.
^
TAPE rec key ª
Press to start tape recording. Pressing this key during
recording initiates record-pause after leaving a no-
sound blank of about 4 seconds.
&
TAPE O.T.E. key fl
Press to start recording CD onto a tape with one-touch
operation.
Pressing this key during CD playback records only the
track being played onto tape. Pressing it during CD
stop records all the CD tracks onto tape.
*
Headphone jack %
Connect headphones with a stereo mini-plug (option-
ally available).
÷ The function of the control knob returns to the normal
mode when it has not been operated for 20 seconds.
Standby mode
While the standby indicator of the unit is lit, a small amount of current is flowing into the unit’s internal
circuitry to back up the memory. This condition is referred to as the standby mode of the unit. While the
unit is in the standby mode, it can be turned ON from the remote control unit.
Controls and indicators
menu set / demo
volume / multi control
\ \ \ \