Kyocera 1650 - Manual (Page 95)

Optional Equipment
4-13
Document Processor
This equipment automatically feeds and scans multiple-sheet originals one by one. Up to 50
originals can be set at one time. Two-sided originals are automatically turned over so that both sides
can be scanned.
Paper Feeder
Cassettes the same as the cassette provided with the main body (300-sheet cassette) can be
added below the cassette of the main body. The method of loading paper is the same as for the
cassette in the main body.
Duplex Unit
Two-sided copies can be made when the duplex unit is installed.
Finisher
The finisher stores a large quantity of copies and can sort multiple copy sets by shifting the position
of ejection for each one. It can also staple collated copy sets.
Job Separator
This unit is used to separate paper output destinations for easy classification. Also the output
destinations can be specified.
Key Counter
The key counter is used to confirm the amount of usage of the copier functions. It is useful in
managing copier usage for each department, section, etc. as well as in the company overall.
Fax Kit
If the fax kit is installed in this machine, you can use this machine as a facsimile machine. Also if the
optional network scanner kit is used together, this machine can be used as a network fax with which
data can be transmitted and received through a computer.
Network Scanner Kit
If the network scanner kit is installed in this machine, you can use this machine as a network
scanner.
Memory Card (CompactFlash)
The memory card is a microchip card to which optional fonts, macros, and forms can be written.
Hard Disk
The hard disk is used for storage of print data of printer. To use all the e-MPS functions, the hard
disk must be installed.
Additional Memory
Adding a memory will increase the maximum number of originals that can be scanned at one time.
Also complicated data can be printed.