Kyocera 1650 - Manual (Page 71)

Basic Operation
3-15
Sort Copying
Since copying in this mode is performed after multiple
originals are scanned and memorized, a required
number of collated copy sets can be produced.
Note If the optional document processor is installed, you can select whether or not to turn on the sort
mode at a default setting. (Refer to Chapter 3 in Advanced Operation Guide, Sort Copying.)
1 Set the original.
2 Press the Sort key.
3 Input the number of copies and press the Start key.
Scanning of the original starts.
If the originals have been set in the optional document
processor, copying starts automatically.
If the original has been set on the platen, a message
prompting replacement of the original is displayed. In
this case, proceed to the next step.
4 Replace the original and press the Start key. Scanning of the original starts.
Original Copy
!
!
!
!