Kyocera 1650 - Manual (Page 47)

Preparations
2-15
Network (TCP/IP) Settings
Register the IP address of this machine.
Notes • The IP address that should be registered here differs depending upon your network
environment. Check with your network administrator before performing this setting.
• If you use the following procedure to manually register the IP address, be sure to turn the
DHCP setting Off and the TCP/IP setting On. (For details, refer to Chapter 2 in Advanced
Operation Guide, Network Setting.)
1 Press the Printer key.
2 Press the S key or the T key to select MENU.
3 Press the Enter key.
4 Press the S key or the T key to select Interface.
5 Press the Enter key.
6 Press the S key or the T key to select Network.
GO
CANCEL
Ready
MENU
Back
Print Status Page
Menu
Interface
Back
Parallel
Interface
Network