Kyocera 1650 - Manual (Page 125)

Appendix-1
Appendix
Specifications
Note Specifications are subject to change without notice to reflect improvements in performance.
Main Body
Copying system Indirect electrostatic system
Original types
accommodated Sheets, books, and 3-dimensional objects (maximum original size:
A3/11 × 17")
Copy sizes
Cassette A3, B4, A4, A4R, B5, B5R, A5R, Folio, 11 × 17" (Ledger), 8
1/2
× 14"
(Legal), 11 Ч 8
1/2
", 8
1/2
Ч 11" (Letter), 5
1/2
× 8
1/2
" (Statement),
8
1/2
× 13" (Oficio II), 8K, 16K
Multi-bypass tray A3 to A6R, postcard, Folio, 11 × 17" (Ledger) to 5
1/2
× 8
1/2
"
(Statement), 8K, 16K
Width that cannot be
copied 0.5 to 5.5 mm
Paper Refer to Appendix in Advanced Operation Guide, Paper.
Paper feed source capacity
Cassette 300 sheets (80 g/m²), 100 sheets (90 to 105 g/m²)
Multi-bypass tray 50 sheets (80 g/m²)
(25 sheets for A3, B4, Folio, 11 × 17" (Ledger), 8
1/2
× 14" (Legal),
8
1/2
× 13" (Oficio II), and 8K sizes)
Output tray capacity 250 sheets (80 g/m²)
Warm-up time Less than 20 seconds
Time for recovery from low power mode: 10 seconds
Time for recovery from sleep mode: 20 seconds
(At room temperature: around 73.4 °F (23 °C), humidity: around 50 %)
Memory
For copier 64 MB
For printer 64 MB
Additional memory For copier: 16 MB, 32 MB, 64 MB, and 128 MB
For printer: 32 MB, 64 MB, 128 MB, and 256 MB
Operating environment
Temperature 10 to 32.5 °C
Relative humidity 15 to 80 %
Altitude 2,000 m maximum
Illumination 1,500 lux maximum
Power source 120 V AC, 60 Hz, 9.0 A
220 to 240 V AC, 50/60 Hz, 5.0 A