Kyocera 1650 User Manual
Page 109
Troubleshooting
6-3
Black lines appear on
copies when copying from
the optional document
processor.
Is the slit glass dirty?
Clean the slit glass.
It is also possible to use the black line
correction function to make any black
lines on the copies less apparent.
Refer to
Chapter 3 in
Advanced
Operation
Guide.
Wrinkling occurs in copies. Is the separation needle dirty?
Clean the separation needle.
Black or white vertical lines
appear on copies.
Is the electrical charge section dirty?
Open the front cover and use the
charger cleaner rod to clean the
electrical charge section.
White spots appear on
copies.
Is the transfer roller dirty?
Clean the transfer roller with the
cleaning brush.
(25 ppm model only)
Copies are blurred.
Is this machine used at high humidity? Perform drum refresh.
Refer to
Chapter 3 in
Advanced
Operation
Guide.
Printing cannot be
performed.
Is the power plug connected to an AC
outlet?
Connect the plug to an AC outlet.
Is the main power switch turned on?
Turn the main power switch on ( | ).
—
Is a proper printer cable connected
securely?
Connect the printer cable securely.
Was the printer cable connected after
this machine was turned on?
After connecting the printer cable, turn
this machine on.
Is the machine offline? (Is the Ready
indicator off?)
1
Press the Printer key to display
the printer basic screen.
2
Press the
S key or the T key to
select
GO.
3
Press the Enter key. The Ready
indicator lights up.
—
Correct characters are not
printed.
Is a proper printer cable connected?
Connect a shielded type printer cable.
Printing is not performed
properly.
Is the setting on the computer correct? Check the setting of the printer driver or
the application software.
—
(25 ppm model only)
The copies are curled.
Is the copy paper wet?
Replace the copy paper with dry, new
paper.
Is
Middle 2 set at the Paper type
(Paper Weight) setting? (Normally,
Middle 2 is set.)
Set
Middle 1 at the Paper type (Paper
Weight) setting.
Refer to
Chapter 3 in
Advanced
Operation
Guide.
Symptom
Items to check
Corrective procedure
Reference
page