Kyocera 1650 - Manual (Page 51)

Preparations
2-19
Setting the Date and Time
Set the current date and time, time difference from the Greenwich Mean Time (GMT), and summer
time.
1 Press the System Menu/Counter key.
2 Press the S key or the T key to select Machine
default
.
3 Press the Enter key.
4 Use the numeric keys to input the four-digit
management code. The management code at the
factory default setting is 1600 for the 16 ppm model,
2000
for the 20 ppm model, and 2500 for the 25 ppm
model.
Note The four-digit management code can be changed. (For details, refer to Chapter 3 in Advanced
Operation Guide, Administrator Management Code Change.)
5 If the management code is accepted, the Machine
default
screen is displayed.
6 Press the S key or the T key to select Date/Time.
Job Accounting
System Menu / Counter:
Copy default
Machine default
Enter pin code using # key.
End
Auto Casstte SW
Machine default:
Paper Size(1st)
On
Auto I
:
:
Low power time
Key sound On/Off
Machine default:
Date/Time
: 15Min.
: On
: 06:33