Kenwood C-707I - Manual (Page 68)

C-707I 68
Set the system clock to the correct time. If the system clock time setting is not correct, the Program Timer
will not start playback at the correct time.
Setting the System Clock
Set the time.
4 4
Use the [<] and [>] keys to set the hour.
Use the [<] and [>] keys to set the minutes.
The currently set day of the week and time are displayed.
If you make a mistake, repeat the procedure from the beginning.
If there is a power failure or if the system is unplugged from the wall outlet for some
time, you must reset the system clock time.
Pressing the [DISPLAY] key while the system is in the Standby mode (OFF) will
display the time for 5 seconds.
Press the [TIMER] key.
Press the [<] or [>] key.
1 1
Set the day of the week.
Use the [<] and [>] keys to set the day of the week.
2 2
Press the [ENTER] key.
Select the timekeeping format.
3 3
Press the [ENTER] key.
Press the [<] or [>] key.
Press the [ENTER] key.
Press the [ENTER] key.
Press the [ENTER] key.
12-hour format
Midnight and
noon displayed as
“12:00”.
12-hour format
Midnight and
noon displayed as
“0:00”.
24-hour format
The current time will appear if clock settings are already confi gured.
Press the [ENTER] key and advance to step 2.
en10_c-707i.indd 68 en10_c-707i.indd 68 12/27/2007 10:26:18 AM 12/27/2007 10:26:18 AM