Kenwood C-707I - Manual (Page 42)

42 C-707I
Listening to FM/AM Radio
Select a station.
2 2
Simply pressing the [TUNER/band] key turns on the system and allows you to listen
to the radio.
This section explains how to listen to the FM/AM radio and set radio stations.
Receiving Radio Broadcasts
Select a reception mode.
Press the [TUNER/band] key.
1 1
Choosing from preset stations (Preset Call)
To select station P17, press the [1] key, press the [7] key, and then press
the [ENTER] key.
To select station P23, press the [2] key, press the [3] key, and then press
the [ENTER] key.
Selecting a preset station with the number keys
Select a preset station.
You need to preset stations before you can perform these operations.
(Page 44)
Selection with the [P.CALL] keys
Each press of the [<] or [>] key cycles sequentially through the preset
stations.
Holding down the [<] or [>] key will scan sequentially through the preset
stations at a 5-second interval.
The mode changes as shown below each time you press the key.
“ST.” is displayed while a stereo broadcast is being received in FM
(Stereo) reception mode.
FM (Stereo) FM (Monaural) AM
en04_c-707i.indd 42 en04_c-707i.indd 42 12/20/2007 4:20:14 PM 12/20/2007 4:20:14 PM